Avaliações de Nullifire SC802 On-Site Water-Based Intumescent Basecoat

Nullifire SC802 can be applied to a smooth matt finish. A compatible top-seal can be applied if a decorative finish is required. Features & Benefits Water based intumescent coating suitable for internal use on structural steelwork for up to 60 minute fire resistance “Next generation” product - with greater efficiency on site Compatible with a full range of Nullifire primers and top seals Very low VOC Surface Preparation & Priming SC802 should be applied onto a clean, undamaged, dry and primed steel surface. Certain types of primers can cause char adhesion problems in a fire. In particular, thermoplastic primers must be avoided. Nullifire recommend and have tested PM015 and PM020 primers. Nullifire have carried out compatibility testing on a wide range of primers. Contact our technical team for details on compatibility. SC802 should not be applied directly to galvanised surfaces or zinc rich primer. The primer must be applied in accordance with the manufacturer’s instructions. Nullifire should be consulted for technical advice when zinc rich primers or the overcoating of existing paints are specifed for use. Application Conditions Nullifire SC802 is recommended for application and use on dry protected structural steel only. If the basecoat is allowed to get wet, it is likely to be damaged – blistering and wrinkling may occur. SC802 should only be applied when the air and steel temperatures are above 5°C. Relative humidity should be below 80% for successful application. Steel surface temperature should be a minimum of 3°C above the dew point. Ensure the steel is dry and free from contact with rain or condensation during the application and drying of SC802. Optifire+: Reliable and traceable fire protection Optifire+ is a unique addition to Nullifire intumescent steel coatings that provides full transparency for: Applicators – Ability to ensure product installed on site is correct and to standards Main Contractors - Ability to ensure that specifications are been adhered to Architects and Specifiers - Ensuring your design projects comply to the latest building regulations and fire protection that is identifiable in future years What is Optifire+ and how does it work? Optifire+ is a unique and impossible to manipulate pigment. With Optifire+ we can be sure, at any time after the project is completed, that the product specified is the product applied – confidence that the materials submitted through the approval processes are installed to protect customer's assets. Optifire+ is invisible to the naked eye and is added to Nullifire intumescent steel coatings. It can be identified with the traceability tool. Why it’s important As a product identifier, Optifire+ doesn’t change the way intumescent coatings work. But it does stimulate that they are used and are applied correctly. Nullifire intumescent steel coatings can’t be altered without it being visible and application can be checked afterwards. With Optifire+, Nullifire goes beyond what’s expected and further endeavors to keep residents and emergency services safe, and protect the buildings that they rely on. Optifire+ is manufactured within the UK. These locally produced products are independently tested and certified according to the highest standard in the industry. Legal Building owners are now more than ever been urged to act and put the safety of residents first. There’s an increased focus and scrutiny on the effectiveness of fire protection strategies in commercial and residential buildings. Negligence or simply being unable to prove that the proper precautions have been taken means risking legal action.